Preparation
Design and Compliance Notes
Unit
Specifications
and Features
Design Notice:
In order to ensure the optimal performance of our products, the design specifications of
the unit and remote control are subject to change without prior notice.
Energy Rating Information:
This product is tested in accordance to the DOE SACC capacity energy rating test.
Unit Temperature Range:
Mode
Cool
Temperature Range
62°F ~ 95°F (17°C ~ 35°C)
Dry
55°F ~ 95°F (13°C ~ 35°C)
Front Rear
control panel
remote signal receptor
handle
(both sides)
horizontal louver control
lever (adjust manually)
NOTE: PHA cannot be
adjusted.
NOTE: PHA cannot be
adjusted.
vertical louver control
lever (adjust manually)
panel
Caster
bottom tray
drain outlet
air filter
(behind the grille)
upper air intake
air outlet
lower air intake
drain outlet
Exhaust Hose Installation:
The exhaust hose and adapter must be installed or removed according to the
desired mode.
For COOL mode must be installed exhaust hose.
For FAN or Dry modes, must be removed exhaust hose.
Unit Specifications and Features
Page 6
To Next Page
Loading...
Need help?
General
