Midea MAP08S1XWT - Page 28

28
Setting the TIMER
TIMER ON setting
TIMER OFF setting
TIMER ON & OFF setting(example)
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
1. Press TIMER ON button to initiate the ON
time sequence.
2. Press Temp. up or down button for for
multiple times to set the desired time to
turn on the unit.
2. Press Temp. up or down button for for
multiple times to set the desired time to
turn o the unit.
NOTE:
1. When setting the TIMER ON or TIMER OFF,
the time will increase by 30 minutes
increments with each press, up to 10 hours.
After 10 hours and up to 24, it will increase
in 1 hour increments. (For example, press 5
times to get 2.5h, and press 10 times to get
5h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer
to 0.0h.
3. Point remote to unit and wait 1sec, the
TIMER ON will be activated.
1. Press TIMER OFF button to initiate the
OFF time sequence.
3. Point remote to unit and wait 1sec, the
TIMER OFF will be activated.
Current
time 1PM
2:00PM 3:00PM
4PM 5PM
6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn o at 6:00PM.
Keep in mind that the time periods
you set for both functions refer to
hours after the current time.
x5
TIMER ON
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
1sec
TIMER OFF
x10
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
1sec
TIMER OFF
xnxn
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
TIMER ON
xn
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
1 2
1 2
3
3