Midea MAW Series User Manual

Air Conditioner Features (MAW08S1YWT/MAW10S1YWT)
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions,
then follow the symbol for the functions you desire. The unit can be controlled by the unit control alone or
with the remote.
2. TO CHANGE TEMPERATURE SETTING:
Press UP/DOWN button to change temperature
setting.
1. TO TURN UNIT ON OR OFF:
Press Power button to turn unit on or off.
Press or hold either UP ( ) or DOWN ( )
button until the desired temperature is seen on
the display.
NOTE
Description
1 ON / OFF • Press to turn unit on or off.
2
UP / DOWN Button • Press to change temperature setting.
3
Fan Speed
• Press to select the Fan Speed in four steps - Auto, Low, Med
or High.
4
Sleep Function • Press to initiate the sleep mode.
5
Check Filter Feature • Press to turn off the cleaning fi lter reminder.
6
CONNECT
Connect Function • Press to initiate smart connection mode. (Smart models only)
7
Energy Saver Feature
• Press to initiate this feature, which will maintain comfort and
save energy.
8
Mode Fuctions
• Press to choose operating mode in a sequence that goes
from Auto, Cool, Dry and Fan.
9
Timer Feature • Press to turn unit Auto Start/Stop.
This temperature will be automatically
maintained anywhere between 62°F (17°C) and
86°F (30°C). If you want to display the actual
room temperature, see To Operate on Fan Only
section.
3. TO ADJUST FAN SPEEDS:
Press to select the Fan Speed in four steps - Auto, Low,
Med or High. Each time the button is pressed, the fan
speed mode is changed. On Dry mode, the fan operates
on Low speed automatically and cannot be changed.
On Auto mode, the fan operates on Auto fan speed
automatically and cannot be changed.
4. SLEEP FEATURE:
Press Sleep button to initiate the sleep mode. In this
mode the selected temperature will increase by 2°F
(1°C) 30 minutes after the mode is selected. The
temperature will then increase by another 2°F (1°C)
after an additional 30 minutes.
This new temperature will be maintained for 7 hours
before it returns to the originally mode and the unit will
continue to operate as originally programmed.
The Sleep mode program can be canceled at any time
during operation by pressing the Sleep button again.
6 9 4 8 3 7 5 12 2
CONNECT
LED Display
23

Midea MAW Series Specifications

General

Brand	Midea
Model	MAW Series
Category	Air Conditioner
Language	English