To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner (be sure to follow the power cord instructions).
2. Turn the power on to the air conditioner, using the ON/OFF button.
3. Set the thermostat to the coldest temperature setting.
4. Select the Cool mode setting.
5. Adjust the louver for comfortable air fl ow (see Air Directional Louvers).
6. Once the room has cooled, adjust the thermostat to the setting you fi nd most comfortable.
7. Make sure the air fl ow inside and outside is not obstructed by anything.
Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions,
then follow the symbol for the functions you desire. The unit can be controlled by the control panel, remote
control, smart phone app or voice control.
Description
1 ON / OFF • Press to turn unit on or off.
2
ECO / Check Filter Feature
• Press to initiate this feature, which will maintain comfort
and save energy.
• Press for 3 sec to turn off the cleaning fi lter reminder.
3
Fan Speed
• Press to select the Fan Speed in four steps - Auto, Low,
Med or High.
4
UP / DOWN
Button • Press to change temperature setting.
5
Mode Fuctions
• Press to choose operating mode in a sequence that goes
from Heat, Auto, Cool, Dry and Fan.
6
Timer Feature • Press to turn unit Auto Start/Stop.
7
Swing / Connect Feature
• Press to initiate the auto swing feature.
• Press for 3 sec to initiate smart connection mode (on
some models).
1 3 5 62 74 4
LED Display
To Next Page
Loading...
