Removal of steam valve，Cleaning and Installation
Note: The moveable cover plate must be cleaned after every use, to ensure the steam vent to
be smooth. After cooling down, clean it and avoid scald.
with a hand, hold the rear side,
and lift it up.
A sketch of opening. Wash it with water after opening.
Note: If the gasket falls off, push it in.
Press down forcibly to install the
steam valve.
As the picture shows: Counterc
-lockwise rotation to open．
As the picture shows: Clockwise
rotation, when hear a noise, it
means installed．Note: before
installation alignment valve
cover, valve seat indication bar．
Cleaning and Maintaining
13
To Next Page
