13
a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you‟re not
selecting any cooking zone.
Touch the timer control, the “10” will show in the timer
display. and the “0” flashes
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the “1” will flash.
Set the time by touching the slider control (e.g.9), now the
timer you set is 95 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining time
Buzzer will beep for 30 seconds and the timer indicator
shows “- -” when the setting time finished.
b) Setting the timer to turn one or more cooking zone off
Touching the heating zone selection control that you want to set
the timer for.
Touch timer control , the “10” will show in the timer display. and
the “0” flashes.
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the “1” will flash.
To Next Page
Loading...
Need help?
General
