11
Safety
Pr
ecautions
Opera
ting
Requirements
Parts and
F
eatures
Start Up
Guide
Contr
ols
Dishw
asher
Loading
Dishw
asher
Use
Dishw
asher
Care
Tr
oubleshooting
ST
ART UP GUIDE
IMPORTANT
:
•
Properly dispose of
/recycle all packing material.
•
Read this entir
e User Manual. You will find important safety information
and useful operating tips.
HOW Y
OUR DISHWASHER CLEANS
Your dish
washer cleans by spraying a mixture of hot water and detergent
through the spray arms against soiled surfaces.
The dishwasher fills with water covering the filter area. Water is then
pumped through the multiple filters and spray arms. Soil particles are
separated from the water and go down the drain as the water is pumped
out and replaced with clean water.
The number of water fills will vary depending on the cycle selected.
BEFORE USING Y
OUR DISHWASHER
1. Check the filters f
or debris that may have been introduced from the
packaging or during installation. See the “Clean Filters” section.
2. Add Rinse Aid. See “Proper Use of Rinse Aid.”
USING YOUR NEW DISHW
ASHER
NOTE: T
o decrease cycle time and possibly improve performance, turn on
the hot water faucet nearest to the dishwasher until the water runs hot.
Turn off the water.
1. Load dishwasher. See “Dishwasher Loading.”
2. Add detergent. See “Proper Use of Detergent.”
3. Select desired CYCLE and OPTIONS. See “Cycle and Option Charts.”
•
Only the Options av
ailable for the Cycle selected will illuminate.
•
The c
ontrols of the selected Cycle and Options will glow to indicate
they are selected.
4. Press START.
IMPORTANT: For the dishwasher to begin operating, the door must be
closed within 4 seconds after pressing Start/Cancel.
5. Close the door firmly to latch.
To Next Page
Loading...
Need help?
General
