BEFORE STARTING INSTALLATION
Parts Included with Product
Packed with the product are the following oven components and accessories.
When product is first unpacked, verify that all these components are present. If
anything is missing, check the packaging materials carefully for missing items.
If items cannot be located, contact Midea customer service at 1-888-365-2230
or visit midea.com/ca/support for assistance.
Anti-Tip Bracket Kit
Wire Rack
Owner's Manual
4-prong 240VAC Power
Cord, Rated 50A (Products
sold in Canada only)
MER30B12AWWC
USER MANUAL
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and speciļ¬cations are subject to change without prior notice for product improvement. Consult
with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
30" STANDARD ELECTRIC RANGE
Materials Needed:
The utility connection and house structure at each home may be different, so
the specific parts required for connection to the house are not included with
the product. The parts identified below are or may be required to complete
the installation. Always use new components - never use an old part for new
range installation.
(not applicable to products
sold in Canada
- these are provided
with power cord)
Strain Relief for
Power Cord (supplied
with cord kit)
5/16" OD Sleeve Anchor
(with 1/4" bolt) - 2 pcs
(for concrete floors only)
14-50P
GETWIREDUSA FX359
To Next Page
Loading...
