HOW TO SET THE COOK TIME FUNCTION
1. When you’re cooking with “Bake, If a set c ooking time is desired, press the
“COOK TIME” button.
2. Use the “+ or –” pad to enter the desired cooking time.
3. Once you have set your cooking time, press the “C T ” pad again to
begin the set cooking time, and the Automatic Oven indicator will light up.
4.
icon appear on the display and begin to flash and the end of cycle tone will
sound. You can press any pad on the control panel to stop the “OFF” icon.
NOTES
At the end of the set time, the oven will automatically turn off, and the “OFF”
OOK IME
If you would like to set a cooking time first, press the “COOK TIME” pad, and use
the “+ or –” pad to enter the desired cooking time, then press the “COOK TIME”
pad again to begin the set cooking time. Next, select to press the “BAKE”
,
and
use the “+ or –” pad to adjust to the desired oven temperature, then press the
“START” pad to begin the oven heating process to cooking, and the Automatic
Oven indicator will light up.
FOOD SAFETY
Cook food thoroughly to help protect against any food borne illnesses. Use a
food thermometer to take food temperatures and check in different locations.
• Do not store heavy items above the cooktop. They could fall and break
the glass.
• To minimize burn risk and maximize cooking efficiency, cookware should
completely cover the outlined area of the cooking element.
• Until the cooktop has completely cooled after use, the surface may still be
hot and burns may occur after the cooking element has been turned off.
To avoid steam burns, do not use wet sponge or cloth while cooking area
is hot.
DELAY TIME
The delay time function is available in the Bake mode.
1. To set the Delay Time, press the “DELAY TIME” pad, and the display will
2. Next, press the “+ or –” pad to set the time to when you would like your
cooking time to begin.
3. Once you have set your desired delay time, press the “DELAY TIME” pad
4. Next, press the “BAKE” pad.
- If the “BAKE” pad has been pressed, press the “+ or –” pad to adjust to the
desired oven temperature.
5. Next, press the “START” pad to begin the delay time and the set time will
appear on the display indicating that your Delay Time mode has been started.
6. When your delay time has been programmed, the Automatic Oven indicator
will light up.
7.
pad.
If you would like to cancel the Delay Time function, press the “CLEAR/OFF”
begin to flash.
again to lock in the set time.
HOW TO SET THE DELAY TIME
To Next Page
Loading...
