Midea MFAG20VA-N - How to Use Basic Functions

TTENTION! Before operation,
please ensure the unit is plugged
in and power is available.
SETTING TEMPER
AUTO Mode
The operating temperature range for units is
16-30°C (60-86°F)/20-28°C(68-82°F).
You can increase or decrease the set
temperature in 1°C (1°F) increments.
COOL Mode
Swing
Boost
Clean
Swing
Boost
Clean
1
3
2
1
3
2
4
44
Basic operation
How to Use Basic Functions
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation based on the
set temperature.
NOTE: FAN SPEED can’t be set in AUTO mode.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press the ON/OFF button to start the unit.
1. Press the MODE button to select COOL
mode.
2. Set your desired temperature using the
TEMP or TEMP butto
3. Press FAN button to select the fan speed
in a range of AU-100%.
4. Press the ON/OFF button to start the unit.