EasyManuals Logo
Home>Midea>Washer>MLV45N1BWW

Midea MLV45N1BWW User Manual

Midea MLV45N1BWW
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Leveling circle
Washer is level – the
water touches the
leveling circle all
the way around.
Washer not level - the
water does not touch
the leveling circle all
the way around.
3. If your washer is not level, carefully tilt your washer just enough to
adjust the leveling feet on the bottom front of your washer. Extend the
feet only as much as is necessary. If the feet are extended too much,
your washer may vibrate.
Plug the power cord into a well-grounded, 3-prong, 120 Volt 60 Hz
approved electrical outlet, protected by a 15-amp fuse or comparable
circuit breaker. Your washer is grounded through the third prong of the
power cord.
Power on
25
loosen lock
Adjustable legs
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MLV45N1BWW and is the answer not in the manual?

Midea MLV45N1BWW Specifications

General IconGeneral
StyleTop-Loading
ColorWhite
Washer Capacity4.5 cu ft
Dryer Capactity-
Max Spin Speed700 RPM
Spin Speeds5 (Extra High
Spin ClassE
Number of Cycles10
Cycle SelectionsClean Washer With Affresh
WashPermanent Press
OptionsWash Temp
No spin and No heatSoak Extra Rinse
HoursExtra Rinse
Noise level-
Temperature Selections5 (Hot
Energy Class-
Annual Energy Consumption216 kWh
Annual Water Consumption-
Water Consumption Per Cycle-
Voltage120 V
Frequency60 Hz
Current10 A
Weight and Dimensions IconWeight and Dimensions
Depth29 in
Height46.2 in
Width27 in
Net Weight68 kg

Related product manuals