Setting the child lock
34
Soak
Wash
Rinse
Spin Done Tub Clean
7. Unload your laundry
•
If you need to pause the cycle (for example to add or remove items or
adjust the load), press the Start Pause button, then open the lid. Your
washer stops. When you are ready to resume washing, close the door,
then press the Start Pause button.
•
•
•
The done light turns on.
Your washer beeps six times and flashes 11, 22, 33, 44, 55, 66 after the
cycle is done.
Your washer unlocks the lid.
•
Open the lid and remove the laundry.
•
Press and hold both the Soil Level and Temp. buttons for three seconds.
The child lock light turns on.
•
To turn off the child lock, press and hold both the Soil Level and Temp.
buttons for three seconds.
When the wash cycle is complete:
Your washer has a child lock function to prevent children from playing with
your washer. When you turn on the child lock, the only buttons that work
are the Power button and the Soil Level and Temp. buttons you use to turn
off the child lock.
NOTE:
•
If your washer is not turned on, the child lock can still remain set.
Press the Power button, turn on the child lock function, then press
the Power button to turn off your washer. When you want to use
your washer, you need to turn off the lock function.
Soak
Wash
Rinse
Spin Done Tub Clean
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troublesho
o
ting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
