Midea MLV45N1BWW User Manual

1.
2.
3.
4.
Load about 6 pounds (2.7 kg) of laundry into the tub.
Press the Power button to turn on your washer.
Turn the cycle selector to select the Rinse & Spin cycle.
Press the Start Pause button to start the test cycle. Your washer should
not rock or vibrate excessively when water fills the tub or when washing
or spinning. The washer should drain well during the spin cycle.
Run a test cycle to make sure that your washer is properly installed.
Caution
•
•
Run a test cycle
26
If you detect any water leaks while the washer is filling or draining,
check the water connections. See Connect the water hoses on page 19
or Connect the drain hose on page 21.
If the washer rocks and/or vibrates excessively, level it again. See
Level your washer your washer on page 24.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troublesho
o
ting

Midea MLV45N1BWW Specifications

General

Style	Top-Loading
Color	White
Washer Capacity	4.5 cu ft
Dryer Capactity	-
Max Spin Speed	700 RPM
Spin Speeds	5 (Extra High
Spin Class	E
Number of Cycles	10
Cycle Selections	Clean Washer With Affresh
Wash	Permanent Press
Options	Wash Temp
No spin and No heat	Soak Extra Rinse
Hours	Extra Rinse
Noise level	-
Temperature Selections	5 (Hot
Energy Class	-
Annual Energy Consumption	216 kWh
Annual Water Consumption	-
Water Consumption Per Cycle	-
Voltage	120 V
Frequency	60 Hz
Current	10 A

Weight and Dimensions

Depth	29 in
Height	46.2 in
Width	27 in
Net Weight	68 kg