Midea MLV45N1BWW User Manual

•
•
•
•
With the tub empty, add one cup of chlorine bleach to the bleach
dispenser.
Press the Power button.
Turn the cycle selector to Tub Clean. When you select Tub Clean, the
only options you can change is the delay option.
Press the Start Pause button.
•
•
•
Select the Quick Wash cycle and add bleach to the washer. Run your
washer through the cycle without a load.
Turn the water faucets off and disconnect the inlet hoses.
Unplug your washer from the electrical outlet and leave your washer
lid open to let air circulate inside the tub.
You can damage your washer if you do not remove water from hoses and
internal components before storage.
To prepare your washer for storage:
Caution
Never use the tub clean cycle when laundry is in your washer. This may
damage the laundry or your washer.
Caution
If your washer has been stored in below-freezing temperatures, allow
time for any leftover water in your washer to thaw out before use.
37
Storing your washer
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting

Midea MLV45N1BWW Specifications

General

Style	Top-Loading
Color	White
Washer Capacity	4.5 cu ft
Dryer Capactity	-
Max Spin Speed	700 RPM
Spin Speeds	5 (Extra High
Spin Class	E
Number of Cycles	10
Cycle Selections	Clean Washer With Affresh
Wash	Permanent Press
Options	Wash Temp
No spin and No heat	Soak Extra Rinse
Hours	Extra Rinse
Noise level	-
Temperature Selections	5 (Hot
Energy Class	-
Annual Energy Consumption	216 kWh
Annual Water Consumption	-
Water Consumption Per Cycle	-
Voltage	120 V
Frequency	60 Hz
Current	10 A

Weight and Dimensions

Depth	29 in
Height	46.2 in
Width	27 in
Net Weight	68 kg