EasyManuals Logo
Home>Midea>Washer>MLV45N1BWW

Midea MLV45N1BWW User Manual

Midea MLV45N1BWW
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
39
Problem Solutions
Washer stops
Lid is locked
or will not
open
Washer does
not drain or
spin
The water
temperature
is not correct
Make sure that the power outlet is a working outlet.
Check the fuse or reset the circuit breaker.
Close the lid, then press the Start Pause button to start
your washer. For your safety, your washer does not spin
unless the lid is closed.
Before your washer starts to fill, it makes a series of
clicking noises to make sure that the lid is locked and to
do a quick drain.
Sometimes your washer may pause between stages in
the cycle. Wait to see if your washer starts again.
Disconnect the inlet hoses and clean the screens
periodically. The hose filter screens may be clogged.
Press the Start Pause button to pause the washer. You
cannot open the lid if the washer is running.
After you pause the washer, it may take a few seconds
for the lid lock to release.
If the lid is locked when your washer is not running,
press the Power button to turn on your washer.
If power fails while your washer is running, when power
is restored, the lid unlocks. Your washer waits three
minutes then runs the rest of the cycle.
Check the fuse or reset the circuit breaker.
Close the lid, then press the Start Pause button to start
your washer. For your safety, your washer does not spin
unless the lid is closed.
Make sure that the drain hose is not kinked. Straighten
as necessary.
Make sure that the height of the drain hose is within
specified limits. See
Drainage requirements on page 14.
The pipes to your sewer system may be clogged.
Contact a plumber or qualified repair professional.
Make sure that you have selected the correct temp.
Make sure that the water source faucets are fully
opened.
Make sure that the hoses are connected to the correct
faucet and water intake connections on your washer,
then flush the lines. See Connect the water hoses on
page 19.
Disconnect the hoses and clean the screens. The hose
filter screens may be clogged.
Safety
Instructions
Features
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MLV45N1BWW and is the answer not in the manual?

Midea MLV45N1BWW Specifications

General IconGeneral
StyleTop-Loading
ColorWhite
Washer Capacity4.5 cu ft
Dryer Capactity-
Max Spin Speed700 RPM
Spin Speeds5 (Extra High
Spin ClassE
Number of Cycles10
Cycle SelectionsClean Washer With Affresh
WashPermanent Press
OptionsWash Temp
No spin and No heatSoak Extra Rinse
HoursExtra Rinse
Noise level-
Temperature Selections5 (Hot
Energy Class-
Annual Energy Consumption216 kWh
Annual Water Consumption-
Water Consumption Per Cycle-
Voltage120 V
Frequency60 Hz
Current10 A
Weight and Dimensions IconWeight and Dimensions
Depth29 in
Height46.2 in
Width27 in
Net Weight68 kg

Related product manuals