Midea MOU-36HFN1-M - Page 103

100
5) Remove the ground
wires.
6) Remove the power
supply wires (L1, L2, S).
7) Then remove the
electronic control box.
4
Four-way
valve
How to remove the
four-way valve.
1) Perform work of item 1,
2, 3.
2) Recover refrigerant
from the refrigerant circuit.
3) Remove the screw of
the coil and then remove
the coil.
4) Detach the welded parts
of four-way valve and pipe.
5) Then the four-way valve
ass’y can be removed
The picture of four-way valve may be different from
the one on your side.
Four-way
valve
Coil of four-way valve, fixing by one screw.
Welded parts