Installation
Tools Needed
-Medium Philips screwdriver; -Tape measure or ruler; -Knife
or scissors; -Saw (optional, to shorten window adaptor for
narrow windows)
Accessories
Your Window Installation Kit fits windows 67.5-123cm
(26.5-48”) and can be shortened for smaller windows.
Window Installation Kit(optional)
Press the exhaust hose into the window slider adaptor (into wall
window slider adaptor for wall installation) and unit adaptor,
clamp automatically by elastic buckles of the adaptors.
Step One: Preparing the Exhaust Hose assembly
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size
of the window slider.
2. If the length of the window requires two window sliders,
use the bolt to fasten the window sliders once they are
adjusted to the proper length.
Window slider A
Window slider B
Bolt
1 pc
1 pc
4 set
Wall Exhaust Adaptor A (only for wall installation)
Wall Exhaust Adaptor B(with cap)(only for wall installation)
Screw and anchor (only for wall installation)
Part Description
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 set
1 set
Unit Adaptor
Window Slider Adaptor
Window Slider A(with hole),
Window Slider B
Exhaust Hose
Bolt
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and 2 Screws
Drain Hose
Quantity
Remote Controller and Battery
(For remote control models only)
8
ON/OFF
TEMP
SHOR T
CUT
TIMER
ON
TIMER
OFF
MODE
FAN
SLE EP
SWING
LED
Step Two: Install the Exhaust hose assembly to the unit
Insert unit adaptor of the Exhaust hose assembly into the lower
groove of the air outlet of the unit while the hook of the adaptor
is aligned with the hole seat of the air outlet and slide down the
Exhaust hose assembly along the arrow direction for installation.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is inserted into the
lower groove of the air outlet.
Type window installation
Drain Hose Adaptor(only for heat pump mode)
Items with are optional. Slight variations in design may occur.
*
*
To Next Page
Loading...
