10
EN
Door handle installation
(!/!ˏ0'!ˏ,.!10%+*/ˏ0+ˏ/!1.!ˏ0$!ˏ$* (!ˏ* ˏ,.!2!*0ˏ%*&1.5.
Step
ȆȐ F%.st take out the bolts for fixing the handle from the package bag of the userˏ
manual and then fasten it on the door body with a cross screwdriver.
ȇȐ Take out the door handle from the refrigerating chamber after the f%.st step isˏ
completed, and then place it the door in the direction as on shown in the figureˏ
and make the two bolts for fixing the handle in the handle.
ȈȐ Use the allen wrench to fasten the screws in two holes of each handle with theˏ
handle fixing bolts.
Bolt
Handle
Bolt
To Next Page
Loading...
