Need help?Do you have a question about the Midea MSC-12HRDN1-QC6(E) and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Split |
| Cooling Capacity | 12000 BTU |
| Power Consumption (Heating) | 1080W |
| Operating Temperature (Cooling) | 32°C |
General safety precautions and specific warnings for installation and operation.
Important cautions for proper installation, usage, and maintenance of the unit.
Details on various functions and features of the indoor unit.
Details on various functions and features of the outdoor unit.
Physical dimensions and drawings of the indoor unit.
Schematic diagram illustrating indoor unit electrical connections.
Schematic diagram illustrating outdoor unit electrical connections.
Torque, cable, pipe length, and elevation guidelines for installation.
Procedure for purging air from the piping and indoor unit.
Steps for pumping down refrigerant during re-installation.
Steps for re-purging air after re-installation.
Procedure to balance refrigerant using 2-way and 3-way valves.
Procedure for achieving vacuum in the refrigeration system.
Steps for charging the correct amount of refrigerant.
Cooling and heating performance charts for the specified model.
Cooling and heating performance charts for the specified model.
Cooling and heating performance charts for the specified model.
Cooling and heating performance charts for the specified model.
Definitions of abbreviations and explanation of display icons.
LED display control, outdoor unit display, and protection features.
Details on Fan-Only and Cooling mode operations.
Details on rating test, turbo, fan rules, drying, and condenser protection.
Indoor fan actions, auto fan, and compressor frequency rules in heating mode.
Outdoor current control, heat exchanger protection, and defrosting mode.
Defrosting sequence, rating test, turbo function, and auto mode.
Forced operation, 4-way valve, fan speeds, timer, and sleep functions.
Auto-restart, ionizer, and outdoor heating cable functions.
Important safety notes regarding electrical components during troubleshooting.
Indoor and outdoor unit error codes and their meanings.
Troubleshooting steps for EEPROM, communication, and zero-crossing errors.
Troubleshooting for fan speed, sensor, and IGBT protection errors.
Troubleshooting for voltage, compressor top, and inverter drive errors.
Procedures for checking resistance of compressor, fan motors, and step motor.
Resistance-Temperature data for various sensors.
To Next Page