What to do if Operation lamp is on and Timer lamp flashes on Midea MSC-07CRN1?
If the Operation lamp is on and the Timer lamp is flashing on your Midea Air Conditioner, it indicates that the indoor PCB is defective. The suggested solution is to replace the indoor PCB.
How to fix EEROM error on Midea Air Conditioner?
If the EEROM on your Midea Air Conditioner has an error, you should reset the EEROM or replace the indoor PCB.
What to do if Midea Air Conditioner shows indoor room temp or evaporator sensor error?
If the indoor room temperature or evaporator sensor is open or short circuit in your Midea Air Conditioner, inspect and replace the sensor if necessary.
General| Brand | Midea |
|---|---|
| Model | MSC-07CRN1 |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent injury to users and property damage during operation and installation.
Critical safety instructions regarding installation, electrical work, and product handling.
Details of operational modes and features for the indoor unit, including sensors and controls.
Details of operational features for the outdoor unit, such as fan systems and protection mechanisms.
Physical dimensions (W, H, L) for various indoor unit models.
Physical dimensions (W, H, L, L1, L2, L3) for various outdoor unit models.
Diagram illustrating the refrigerant flow during cooling operation.
Diagram illustrating the refrigerant flow during heat pump (heating) operation.
Charts showing acceptable operating temperature ranges for cooling mode.
Charts showing acceptable operating temperature ranges for heating mode.
Detailed electronic schematic diagram of the air conditioner's internal circuitry.
Wiring diagrams for different models (MSC-07CRN1, MSC-09CRN1, MSC-12CRN1, MSC-07HRN1, MSC-18CRN1).
Recommended torque values for tightening nuts during installation.
Guidelines for selecting power cord gauge based on unit capacity.
Specifications for pipe length, elevation difference, and additional refrigerant.
Procedure for removing air and moisture from the refrigerant piping system.
Procedure to recover refrigerant into the outdoor unit before servicing or removal.
Procedure for purging air from the system after re-installation, involving refrigerant discharge.
Procedure for balancing refrigerant levels using the 2-way and 3-way valves.
Steps for creating a vacuum in the refrigerant system to remove non-condensable gases.
Steps for charging the system with the correct amount of refrigerant.
Refrigerant pressure data for MSC-07CRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-07HRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-09CRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-09HRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-12CRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-12HRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-18CRN1 under various indoor and outdoor conditions.
Refrigerant pressure data for MSC-18HRN1 under various indoor and outdoor conditions.
Cooling and heating capacity (kW) and input (kW) for MSC-07CRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-07HRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-09CRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-09HRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-12CRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-12HRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-18CRN1.
Cooling and heating capacity (kW) and input (kW) for MSC-18HRN1.
Explanation of symbols and abbreviations used in electronic functions and protections.
Summary of key functions like remote receiving, testing, LED display, and timers.
Details on compressor protection, sensor protection, and fan speed control.
Description of fan speed settings and operation in fan-only mode.
Explanation of 4-way valve action and compressor/fan control in cooling mode.
Details on 4-way valve action and compressor/fan control in dehumidifying mode.
Explanation of 4-way valve action and compressor/fan control in heating mode.
Conditions and timing for defrosting operation in heating mode.
How the unit automatically selects cooling, heating, or fan-only modes.
Procedure for activating and parameters of the forced cooling mode.
Details on the sleep mode for cooling, heating, and auto operations.
How the unit restores previous settings after a power failure.
Explanation of the turbo mode for faster cooling and its duration.
Description of optional Plasma and Anion features and their usage.
Explanation of indicators on the display board (Auto, Defrost, Temp, Operation, Timer).
Table correlating failure phenomena with operation and timer lamp states.
Flowchart to diagnose issues when the air conditioner does not operate.
Procedure for diagnosing frequent resetting during operation.
Troubleshooting steps for operation lamp flashing and timer lamp off.
Troubleshooting steps for operation lamp flashing and timer lamp on.
Troubleshooting steps for operation lamp off and timer lamp flashes.
Troubleshooting for operation lamp on and timer lamp flashes (EEROM error).
Troubleshooting for both operation and timer lamps flashing (over-zero signal detection fault).
To Next Page