Midea MSC-07CRN1 - Specification

Service manual
6
4. Specification
MSC-07CRN1 MSC-07HRN1 MSC-09CRN1 MSC-09HRN1
Ph-V-Hz
1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz 1, 220-240V~, 50Hz
Capacity Btu/h 7000 7000 9000 9000
Input W 640 640 820 820
Rated current A 2.9 2.9 3.8 3.8
EER Btu/w.h 10.9 10.9 10.9 10.9
Capacity Btu/h ----- 8500 ----- 11000
Input W ----- 690 ----- 890
Rated current A ----- 3.1 ----- 4
COP W/W ----- 3.6 ----- 3.6
A 5 3.8 4.5 4.5
A 15 17 17 20
Model
PA82X1C-4DZDE PA82X1C-4DZDE PA108X1C-4FTDE PA108X1C-4FTDE
Type Rotary Rotary Rotary Rotary
Brand TOSHIBA TOSHIBA TOSHIBA TOSHIBA
Capacity Btu/h 7000 7000 9000 9000
Input W 730 730 920 920
Rated current(RLA) A 3.3 3.3 4.1 4.1
Locked rotor Amp(LRA) A 16 16 18.7 18.7
Thermal protector MRA13408-9087 MRA13408-9087 MRA13430-9087 MRA13430-9087
Capacitor uF 25 25 25 25
Refrigerant oil ml 300 300 330 330
Model RPG13H RPG13H RPG13H RPG13H
Brand Welling Welling Welling Welling
Input W 36.5 36.5 39.5 39.5
Capacitor uF 1.2 1.2 1.2 1.2
Speed(hi/mi/lo) r/min 1050/920/820 1050/920/820 1200/950/850 1200/950/850
m3/h
430/360/310
450/400/350 450/400/350 500/430/370
dB(A)
35/32/29
35/32/30 35/32/30 37/34/31
Model YDK24-6T YDK24-6T YDK24-6F YDK24-6F
Brand Welling Welling Welling Welling
Input W 56 56 56 56
Capacitor uF 2.5 2.5 2.5 2.5
Speed r/min 800 800 800 800
m3/h 1500 1500 1800 1800
dB(A)
49
49 49 50
g
800
820 900 920
Liquid side/ Gas side mm Ф6.35/Ф9.53 Ф6.35/Ф9.53 Ф6.35/Ф9.53 Ф6.35/Ф9.53
Max. pipe length m 20 20 20 20
Max. in level m 8 8 8 8
℃
17-30
17-30 17-30 17-30
℃
18~-45 -7-45 18-45 -7-45
m2 10~14 10~14 14-21 14-21
Ambient temp
Application area
Outdoor noise level
Refrigerant type (R410A)
Refrigerant
piping
Operation temp
Indoor air flow (Hi/Mi/Lo)
Indoor noise level (Hi/Mi/Lo)
Outdoor fan
motor
Outdoor air flow
Max. current
Starting current
Compressor
Indoor fan
motor
Model
Power supply
Cooling
Heating
Note:
The noise date is base on hemi-anechoic chamber, during actual operation; these values are normally somewhat
different as a result of ambient condition.
The above design and specifications are subject to change without prior notice for product improvement.