To Next PageTo Next PageWhat to do if my Midea MSV1-18HRDN1-MQ0W has over voltage or low voltage protection?
If your Midea Air Conditioner is showing an over voltage or too low voltage protection error, verify the voltage supply to the unit to ensure it's within the recommended range.
What to do if Midea MSV1-18HRDN1-MQ0W Air Conditioner shows IPM malfunction or IGBT over-strong current protection?
If your Midea Air Conditioner indicates an IPM malfunction or IGBT over-strong current protection, test the IPM. If it is faulty, replace it.
What to do if outdoor temperature is too low for my Midea MSV1-18HRDN1-MQ0W Air Conditioner?
If the outdoor temperature is lower than -15°C (5°F) when you are trying to use your Midea Air Conditioner, allow the unit to operate within the recommended temperature ranges to avoid issues.
How to resolve EEPROM parameter error in Midea Air Conditioner indoor unit?
To resolve an EEPROM parameter error in your Midea Air Conditioner's indoor unit, check the EEPROM parameters and reset them if necessary.
General| Cooling Capacity | 18000 BTU/h |
|---|---|
| Heating Capacity | 18000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Outdoor Unit Dimensions (WxHxD) | 800 x 554 x 333 mm |
| Indoor Unit Weight | 12 kg |
| Outdoor Unit Weight | 34 kg |
| Type | Split |
| Operating Temperature (Heating) | 0-24 °C |
Instructions to prevent injury to users and property damage during operation.
Critical warnings and precautions for installation, operation, and maintenance.
Illustrates the internal wiring schematic for indoor units, detailing connections.
Step-by-step procedures for initial system installation, leak testing, and evacuation.
Details various protection mechanisms built into the air conditioner for safe operation.
Lists error codes displayed on the indoor unit and their corresponding descriptions.
Explains LED indicators and their meanings for outdoor unit troubleshooting and status.
Provides diagnostic procedures and solutions for common error codes like E0, E1, E5.
Step-by-step guide on how to disassemble front panel, electrical parts, and evaporator.
Detailed instructions for disassembling panel plates, fan assembly, and electrical parts of the outdoor unit.
