36
More features
●
●
●
●
●
●
●
Auto-Restart
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Anti-mildew
When turning o the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
Wireless Control (Model dependent)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
Louver Angle Memory
When turning on your unit, the louver will
automatically resume its former angle.
Refrigerant Leakage Detection
The indoor unit will automatically display “EC”
or “EL0C”or flash LEDS (model dependent )
when it detects refrigerant leakage.
The SLEEP function is used to decrease
energy use while you sleep (and don’t
need the same temperature settings to
stay comfortable).
Press the SLEEP button on remote control
when in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after
another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
Sleep Operation
For the USB device access, replacement,
maintenance operations must be carried
out by professional sta.
Set
temperature
1hr
1hr
Keep
running
SLEEP Operation
Saving energy during sleep
Heat mode( -1 C/2 F) per hour for the first two hours
Cool mode(+1 C/2 F) per hour for the first two hours
The sleep feature will stop after 8 hours and
the system will keep running with final
situation.
To further optimize the performance of your unit, do the following:
Keep doors and windows closed.
Limit energy usage by using TIMER ON and TIMER OFF functions.
Do not block air inlets or outlets.
Regularly inspect and clean air filters.
●
●
●
●
Breeze Away (some units)
This feature avoids direct air flow blowing on
the body and make you feel indulging in
silky coolness.
• Active Clean function(some units)
-- The Active Clean Technology washes away
dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thawing
the frost. A “pi-pi” sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
eect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the
evaporator, thus keeping the inside clean.
-- When this function is turned on, the indoor
unit display window appears “CL ” , after 20
to 130 minutes, the unit will turn o
automatically and cancel Active Clean function.
-- For some units, the system will start high-
temperature cleaning process, and the
temperature of air outlet is very high.
Please keep away from it. And this would lead
to the rising of the room temperature .
Not all the functions are available for the air conditioner you purchased, please check the indoor display
and remote control of your unit.
NOTE
To Next Page
Loading...
