Midea MTI-18HWN1-Q - Features

Features
1.
1.1

*18K unit
1.2 Installation accessories: (Optional)

1.3 Flexible

Features
58
1.
Features
1.1
Slim
Design

The industry Lowest height is designed to be fitted into tight roof spaces.
*18K unit
-
210mm,24K/30K unit
1.2 Installation accessories: (Optional)

Front Board, Canvas Air Passage, Filter, Panel, for easy installation
1.3 Flexible

The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
application.
Features
Design
The industry Lowest height is designed to be fitted into tight roof spaces.
210mm,24K/30K unit
1.2 Installation accessories: (Optional)
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
1.3 Flexible Air Intake Way (Bottom side or Rear side)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
application.
Air intake from rear
The industry Lowest height is designed to be fitted into tight roof spaces.
210mm,24K/30K unit
-
249mm
1.2 Installation accessories: (Optional)
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
Air Intake Way (Bottom side or Rear side)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
Air intake from rear (Standard)
The industry Lowest height is designed to be fitted into tight roof spaces.
249mm
，
36K unit
1.2 Installation accessories: (Optional)
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
Air Intake Way (Bottom side or Rear side)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
(Standard)
The industry Lowest height is designed to be fitted into tight roof spaces.
36K unit
-
300mm
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
Air Intake Way (Bottom side or Rear side)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
The industry Lowest height is designed to be fitted into tight roof spaces.
300mm
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
Air Intake Way (Bottom side or Rear side)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
Air intake from bottom (Optional)
The industry Lowest height is designed to be fitted into tight roof spaces.
Front Board, Canvas Air Passage, Filter, Panel, for easy installation
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
Air intake from bottom (Optional)
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
Air intake from bottom (Optional)
Duct Type
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different
Duct Type
The frame size of air inlet in rear and bottom is the same. It’s very easy to switch to match different