Midea MWB10CW71 User Manual

 Page 13 
1. PREPARE THE WINDOW
Lower sash must open sufficiently to allow a clear vertical opening (H) of following size
(see Table 1). Side louvers and the rear of the AC must have clear air space to allow
enough airflow through the condenser, for heat removal. The rear of the unit must be
outdoors, not inside a building or garage.
NOTE
Save Carton and these Installation Instructions for future reference. The carton is the
best way to store unit during winter, or when not in use.
NOTE
Weather stripping is only
for Energy star models.
Installation
Instructions
Mounting Hardware
3/4” (or 1/2”)
Screws
(7)
Lock Frame
(2)
Sash Lock
(1)
Window sash
seal foam
(1)
Weather
stripping
10*3/4”*1/12”
(5)
2. PREPARE AIR CONDITIONER
A: Remove the air conditioner from the carton and place on a flat surface.
B: Remove top rail and R1 hardware (R1 hardware only for Energy star models) from the
packaging material as shown in Fig. A.
3/8” Screws
(4)
Top Rail
(1)
R1 Hardware
(2)
Top Rail Hardware
Packaging
Fig. A
Top Rail
R1 hardware
(for < 10000 Btu/h
models only)
R1 hardware
(for > 10000 Btu/h
models only)

Midea MWB10CW71 Specifications

General

Brand	Midea
Model	MWB10CW71
Category	Air Conditioner
Language	English