What to do if my Midea MWH-38P3 Water Heater heating indicator light is on but the outlet water is cold?
If the heating indicator light is on, but the water from your Midea Water Heater is cold, it could be that the thermal cut out is cut off or the heating elements are broken. First, check and troubleshoot, then press the reset handle of the thermal cut out. If that doesn't work, you may need to change the heating elements.
What to do if my Midea MWH-38P3 Water Heater heating indicator light is off and the outlet water is cold?
If the heating indicator light is off and the water is cold, check a few things: * Ensure the “TEMP” knob is properly adjusted. * Adjust the water flow to ensure it's sufficient (more than 1.2L/min). * If those aren't the problem, the flow sensor of the rotor may be clogged with impurities. Try cleaning the rotor or changing the flow sensor. Note that a PCB error could also be the cause, requiring repair or replacement of the PCB.
What does it mean if the “EARTH”, “ELCB” and “POWER” indicator lights are twinkling flicker at the same time on my Midea MWH-38P3 Water Heater?
If the “EARTH”, “ELCB” and “POWER” indicator lights are twinkling flicker simultaneously on your Midea Water Heater, this indicates an electricity leak. Contact authorized service personnel for repair.
What to do if the “POWER” indicator light is twinkling flicker on my Midea MWH-38P3 Water Heater?
If the “POWER” indicator light is twinkling flicker on your Midea Water Heater, the temperature sensor is likely broken and needs to be changed.
Why is my Midea Water Heater outlet water temperature sometimes hot and sometimes cold?
The inconsistent water temperature from your Midea Water Heater could be due to unstable water pressure or overheating protection kicking in repeatedly. To resolve this, try lowering the heating power and increasing the water flow.
How to fix no water flowing from the shower head of my Midea MWH-38P3 Water Heater?
If no water is coming out of your Midea Water Heater's shower head, it might be due to the running water supply being cut off or the inlet valve not being open. Wait for the water supply to be restored, or open the inlet valve.
Why can’t the pressure be increased on my Midea MWH-38P3?
If the pressure cannot be increased on your Midea Water Heater, it indicates a PUMP error. Contact authorized service personnel for repair.
Why is the ELCB indicator light off on my Midea MWH-38P3?
If the ELCB indicator light is off when you switch on the power supply of your Midea Water Heater, check whether power is cut. If the power supply is fine, it could indicate a PCB error, and you should contact authorized service personnel for repair.
Provides specific safety guidelines for household use, installation, and operation.
Details technical specifications like voltage, power, current, and dimensions for various models.
Illustrates and labels the main components and internal parts of the water heater.
Presents the internal wiring diagram for MWH-38P3 & MWH-38P3-RS models.
Outlines the sequential steps for installing the water heater, including plumbing and electrical connections.
Details the procedure for installing the power cord, including preparation and terminal connection.
Provides guidance on determining installation position and mounting the unit securely on the wall.
Explains how to connect the water inlet valve with a filter and the shower flexible tube.
Instructs on connecting the water heater to the electric network, including knob settings and wiring.
Details the process of supplying water to the unit and checking for leaks after installation.
Describes how to turn on the power supply and activate the heating function.
Explains the procedure for testing the leakage protection circuit using TEST and RESET buttons.
Details how to adjust the water flow rate using the dedicated control valve.
Explains the indicators and behavior of the unit during electricity leakage events.
Guides on adjusting water temperature by controlling water flow and power settings.
Explains how to activate the pump for models MWH-38P3 & MWH-38P3-RS.
Details how to adjust water pressure using the pump function for specific models.
Describes how the unit behaves after overheating protection is triggered and how to reset it.
General| Power Source | Electric |
|---|---|
| Voltage | 220-240V |
| Rated Power | 3800W |
| Frequency | 50 Hz |
| Thermostat | Adjustable Thermostat |
| Installation | Wall Mounted |
| Type | Electric Water Heater |
| Capacity | 38L |
| Safety Features | Overheat Protection, Dry Heating Protection |
To Next Page