Flooded type water cooled screw chiller (PCB Control)
10
High-precision machining and measurement make rotor clearance reach μm-class, so it reduces the
leakage between high and low pressure. Under continuous operation, the rotors still keep their best
clearance and achieve highest efficiency.
Semi-hermetic compressor with low running noise and well cooled down by refrigerant, low running
temperature, no leakage potential compared with open compressor.
Patented motor-cooling design in ducts of refrigerant flow encompassing stator provides best
dissipation of heat and no requirement for computer room AC.
To reach high operation efficiency, the casing is manufactured by precise machining centers and
inspected by a coordinate measuring machine to make sure that the requested precision and quality
can be retained in the compressor.
Three stages oil separation
The built-in oil separator utilizes three-stage filter mechanism with high-density filter element to
achieve optimal oil separation effect and its efficiency is higher than 99.7%.Two oil separators
cooperate together make the best oil separating effect.
Detachable demister for cleaning.
Oil supplied by pressure difference and no need of oil pump.
Dual compressors (Min. 1080 ~ Max.1780kW)
To Next Page
Loading...
