Flooded type water cooled screw chiller (PCB Control)
31
10. Accessories
Standard accessories
Water pressure difference switch
Optional Accessories
Installed on evaporator outlet pipe
to prevent heat exchange pipe
from frost crack.
To avoid vibration and noise, it
must be used between base and
foundation when install the unit.
Can be installed in the control room.
Through the cable connected to the
unit touch screen, it can display all
states information and complete all
the operations of unit
(startup/shutdown, error confirm,
etc.)
Q235-B,150-10
(340/440/540kW)
Flange connection can be
chosen for water pipe connection.
Customer can choose water side
pressure 1.6MPa according to
requirement.
Q235-B,200-10
(690~1780kW)