3
OPERATING INSTRUCTIONS
Control panel
Do not cover
● Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 220-240V 50Hz AC power supply, before use, please confirm if the rated current of
the power socket meets the local requirements with safe grounding device, otherwise, please
replace it with the qualified socket.
● Put the machine on the flat place
Uneven place may possibly cause the turnover switch at abnormal position, then the heater
can’t work after turning on, therefore, please put the heater on the flat place, at least the surface
below the base of the heater must be flat.
● Mode setting
press and hold “ ” key to select between 4 functions: Fan only,Low.High
, Heat,1200W(LOW). High 2000W(HIGH).
● Temperature setting
press and hold “ ” key to set the Temperature: 18°C、21°C、24°C、27°C、30°C.
● Turn off the Heater
A. Press“ ON/OFF” key to turn off the Heater .
B. Remove the power plug, store the heater after the entire machine has become cool.
● Safety Protection
1.Overheat protection: When the temperature in the heater is too high due to
abnormality in the use environment or improper use, the thermostat device can
automatically cut off the power and the heater stops working. After the whole
heater is cooling, the heater can return to the normal use after removing the
abnormality.
2.Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after
the body is placed upright.
Safty grill
ON/OFF Temperature setting
function display
Temperature
display
Mode setting
To Next Page
Loading...
Need help?
General
