4
ADDITIONAL FEATURES
This heater has additional features:
• Convenient Carry Handle – allows for easy transport from room to room.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
• Ensure that your circuit breaker or fuse is working properly.
• Be sure the heater is plugged in and that the electrical outlet is working properly.
• If the machine suddently stops during heating, the temperature may be exceeds
the threshold of the thermal cut-off. Turn it off. Then Make sure that there is no
obstruction and cool the machine. Turn it on again by referring to the
OPERATING
INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE WARRANTY
INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE
HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR
PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO
THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least one time during the operating season in
order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF
AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for off-season storage.
• Turn off the heater , unplug it and wait for the heater to cool down.
• Use a dry cloth to clean only external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and dry place.
SPECIFICATIONS
Model No.: NF20-18URB/NF20-18URW
Voltage: 220-240V, 50Hz
Current: Maximum continuous draw: 8.7 Amps.
Power: LO = 1200 Watts, HI = 2000 Watts
Tolerances on all specificati
Warning:This heater cannot achieve accurate temperature control of the enviroment, and thus cannot be
used as insulation device for storage environment, items, animals and plants.
ons: Not exceeded than 105%.
To Next Page
Loading...
Need help?
General
