Midea NTH15-23AR

维修手册 Service Manual, 2021 v1.0
13 / 17
3.7 安装后壳、滤网盖及拨钮 Install the rear cover, filter cover and knob
1) 将后壳盖在前壳上，打上螺钉。
1) Put the rear cover on the front cover, tighten
the screws.
2)装上滤网，打上螺钉。
2) Install the filter cover on the rear cover,
tighten the screws.
3) 将拨钮安装在前壳上。
3) Install the knob into the front cover.