维修手册 Service Manual, 2021 v1.0
14 / 17
4. 常见及解决方法 Fault code and solutions
A、需检查有没有在非正常情况下使用,如有,需检
查限温器是否跳断;
B、如正常情况下使用,
内部端子松脱或接触不良:检查,排除故障
更换电路板
更换发热体
更换倾倒开关;
A. It is necessary to check whether it is used under
abnormal conditions. If it is, check whether the
temperature limiter is broken.
B. If used under normal conditions,
Loose internal terminals or poor contact: check and
troubleshoot
Replace the board;
Replace the heating element;
Replace the dump switch;