Midea NTH20-17BR

18
SPECIFICATIONS
Power supply: AC 220-240V ~ 50Hz
Model
Power regulation range (w)
Low High
NTH20-17BR 1200 2000
Troubleshooting
If the product does not operate or does not operate properly, first check
according to the following list. If the reason that the product does not operate
or does not operate properly is not included in the following list, the product
may have failed. In this case it is recommended to send the product to the
dealer for repair.
Problem Possible Cause Solution
After the power is
connected the machine
does not work.
The plug may not be
connected properly
to mains power.
Check whether the
plug is properly
inserted into the
receptacle.
The heater suddenly
stops heating.
The temperature
exceeds the threshold
of the thermal cut-off.
Let the device cool
down before use.
READ AND SAVE THESE INSTRUCTIONS