Need help?Do you have a question about the Midea OSK103 and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | OSK103 |
| Category | Air Conditioner Accessories |
| Language | English |
Procedure to remove the protective cap from the smart kit before installation.
Open the front panel and insert the smart kit into the reserved interface.
Attach the QR code to a convenient location for scanning by the mobile phone.
Keep spare QR codes in a safe place or save them digitally for future use.
Warning that the interface is only compatible with manufacturer-provided SMART KIT.
Caution that the QR code for app download is different from the one packed with the SMART KIT.
Scan QR code to download the 'Midea Air' APP or find it via Google Play/App Store.
Ensure the mobile device is connected to a WiFi router connected to the internet.
Ensure the mobile device is connected to the desired WiFi network and forget irrelevant ones.
Step one: Click on the 'Login' button on the app's main screen.
Enter email and password, then click 'Create Account' after agreeing to terms.
Press specific buttons seven times within 3 minutes until 'AP' appears on the display.
Reminder that some AC units may require powering off and on before entering AP mode.
Log in to the app and press '+' on the appliance list to add a new device.
Select between 'Scan QR Code Method' or 'No need to Scan Qrcode Method'.
Scan QR code, select WiFi network, enter password, and confirm success.
Notes on device status ('offline') and troubleshooting steps for Android QR code setup.
Select hotspot, enter password, select WiFi, enter password, and confirm success.
Notes on device status ('offline') and troubleshooting steps for Android no-scan setup.
Scan QR code, connect to hotspot, go to settings, choose network, enter password, and confirm.
View the device on the list after successful iOS QR code configuration.
Connect to hotspot, go to settings, choose network, enter password, and confirm.
View the device on the list after successful iOS no-scan configuration.
Notes on device status ('offline') and troubleshooting steps for iOS no-scan setup.
Overview of controlling the unit via the app after logging in and selecting the unit.
Note that not all app functions are available on all air conditioners; refer to manual for details.
Screenshots showing mode selection and wind speed adjustment within the app.
Includes Timer on/off, Sleep curve, Check, Energy Monitor, Bill Control.
Note that not all units support all special functions, which will be hidden if not supported.
Weekly appointment setting for turning AC on/off at specific times with circulation control.
User customization of comfortable sleep by setting target temperature curves.
Check AC running status, displaying normal/abnormal items and detail information.
Monitor electricity consumption of the AC unit by checking charts and history records.
Set parameters to limit electricity consumption over a specified period.
Notes on compatible systems (iOS, Android) and potential software version limitations.
Details on supported WiFi encryption (WPA-PSK/WPA2-PSK) and recommendations.
Cautions regarding network timeouts, display discrepancies, and smartphone camera requirements.
FCC/IC compliance, radiation exposure limits, and operational instructions.
To Next Page
