11
12
Coolin/Fan operation
MODE
TEMP UP/DOWN
FAN
Ensure the unit is plugged in and power is
available.
1.
Press the button to select Cool or
Fan mode.
3. Press the button to set the
desired temperature.
4. Press the button to select the fan
speed.
Press the button to start the air
conditioner.
2.
ON/OFF
In Fan mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 2 and 4 may be performed.
NOTE
How to use the buttons
Auto operation
MODE
TEMP UP/DOWN
Ensure the unit is plugged in and power is
available.
1.
Press the button to select Auto.
3. Press the button to set
the desired temperature.
Press the button to start the air
conditioner.
2.
ON/OFF
3
4
2
1. In the Auto mode, the air conditioner can logically
choose the modes of Fan and Cooling
by sensing the dierence between the actual
ambient room temperature and the set temperature
on the remote controller.
2. You cannot change the fan speed in auto mode.
it has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
1
3
3
2
1
3
3
2
1
3
2
1
2
Dehumidifying
operation
Ensure
the
unit
is
plugged
in
and
power
is
available.
1.
Press
the
ON/OFF
button
to
start
the
air
conditioner.
2.
Press
the
MODE
button
to
select
Dry.
3.
Press
the TEMP
UP/DOWN button
to
set
the
desired
temperature.
NOTE
In
the
Dehumidifying
mode,
you
cannot
change the
fan
speed.
It
has
already
been
automatically
controlled.
Timer
operation
Press the Timer button to set the Auto-Start
and
Auto-stop
time
of
the
unit. Auto-start/ Auto-stop
programs can be set from 0-12 hours.
NOTE:
To
set
Auto-start
time,
the
unit
must
be
in
the
O
position.
To
set
Auto-stop
time,
the
unit
must
be
in
the
On
postion.
To
set
the
Auto-start/stop
time.
1.
Press
the
TIMER
button,
when
the
TIMER
ON
indicator
displayed
on
the
LED
window
of
the
air
conditioner,
it
indicates
the
Auto
Start
setting
program
is
initiated.
When
the
TIMER
OFF
indicator
displayed
on
the
LED
window
of
the
air
conditioner,
it
indicates
the
Auto
Stop
setting
program
is
initiated.
2.
Press
or
hold
the
Up(
)
or
Down(
)
to
change
the
Auto
time.
The
control
will
count
down
the
time
remaining
until
start/stop.