Midea RG58F1(2H)/BGEFU1 - Handling The Remote Controller; Battery and Holder Installation; Usage Tips and Precautions

Mode
SET
Mode
SET
5 6
Transmission Indicator
Horizontal louver
auto swing display
Vertical louver auto
swing display
Sleep mode display
Turbo mode display
Fresh feature display
Follow me feature
display
Not available for
this unit
Not available for
this unit
Not available for
this unit
Self clean feature
display
Silence feature
display
Lights up when remote
sends signal to indoor
unit
ON/OFF display
Appears when the unit is turned on,
and disappears when the it is turned off.
TIMER ON display
Battery display
ECO display
LOCK display
Fan speed display
Indicates that the LOCK
function is on.
Displays selected fan speed:
Temperature/Timer/Fan
speed display
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions
Temperature range:
o
16-30 C
O
/60-86 F
Timer setting range:
0-24 hours
Fan speed setting range:
AU% -100%
This display is blank when
operating in FAN mode.
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed in a range of Au%-100%, in
conjunction with Temp or Temp
button.
4. Press the ON/OFF button to start the
unit.
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFF button to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
SETTING TEMPERATURE
AUTO operation
The operating temperature range for units is
O O
16-30 C/60-86 F. You can increase or
O O
decrease the set temperature in 0.5 C/1 F
increments.
COOL operation
1
1
3
4
3
2
2
Displays when ECO
feature is activated
Low battery detection
Remote LCD Screen Indicators
How To Use The Basic Functions
MODE display
Displays the current
mode, including:
Displays when TIMER
ON is set
TIMER OFF display
Displays when TIMER
OFF is set
11%-20%
1%-10%
21%-30%
91%-100%
AUTO
.................
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
operation only the relative functional signs are shown on the display window.
All indicators shown in the figure are for the purpose of clear presentation. But during the actual