To Next PageTo Next PageWhat to do if my Midea Heat Pump system shows an error?
If your Midea Heat Pump system is showing an error, try resetting the system. After resetting, check to see if the error reappears. This can help identify if it's a recurring issue.
What to do if my Midea RSJ-35/300RDN3-D has an electric leakage error?
If you encounter an electric leakage error with your Midea Heat Pump, inspect the PCB (Printed Circuit Board). Check for any potential short circuits that may be causing the leakage.
What to do if my Midea Heat Pump shows (T4) Outdoor ambient temperature sensor error?
If your Midea Heat Pump displays a (T4) Outdoor ambient temperature sensor error, switch to Enhanced Heating Mode. This may help to resolve the issue.
What to do if my Midea Heat Pump shows (T3) Condenser output pipe temperature sensor error?
If your Midea Heat Pump is showing a (T3) Condenser output pipe temperature sensor error, test the sensor. If the sensor is faulty, replace it.
What to do if my Midea RSJ-35/300RDN3-D shows Tank and Wired Controller communication error?
If your Midea Heat Pump displays a Tank and Wired Controller communication error, inspect the wiring. Look for any loose connections or damages that might be causing the communication problem.
How to fix Error of sensor T5L in Midea Heat Pump?
To address the Error of sensor T5L in your Midea Heat Pump, check the temperature sensors. If needed, calibrate the sensors.
How to fix Error of sensor T5U in Midea RSJ-35/300RDN3-D Heat Pump?
To fix the Error of sensor T5U in your Midea Heat Pump, check the sensor connection. If the connection is fine, consider replacing the sensor.
Detailed technical data including performance, electrical, and component specifications.
Illustrates electrical connections and component layout for installation and troubleshooting.
Shows the water and refrigerant flow paths within the unit for installation.
Essential safety warnings and guidelines to prevent injury and equipment damage.
Instructions for safe and correct electrical connections, including power specifications.
Common issues, their causes, and recommended solutions.
Detailed guide to error codes and systematic troubleshooting steps.
General