MCAC-HTSM-201506 Midea R410A Direct Heating Commercial Heat Pump 50Hz Technical Manual
30
pad between the rop and unit in order to protect the unit.
Distance between the hood and air outlet mesh shoule be more than 1 meter, and ensure
that the hood has enough strength as well as reliability in handling process.
Unit gradient (α) should be less than 3º. Handle with care, do not collide and drag drastically.
DO NOT stand in handling operating radius.
The distance between the air outlet mesh of unit and lift hook should be more than 1 meter.
RSJ-420/SZN1-H
RSJ-800/SZN1-H
2.3 Unit installation caution
The unit can be installed on the ground or on the suitable roof, but enough ventilation
volume should be ensured in both cases.
The unit should not be installed where noise and vibration are required to a certain extent.
To Next Page
Loading...
