Midea RSJ-420/PZN1-H - Page 74

MCAC-HTSM-201506 Midea R410A Direct Heating Commercial Heat Pump 50Hz Technical Manual
74
 Do not install the unit in a place with much oil, steam, sulfide gas. Otherwise, the product
may deform and fail.
1.4.2 Preparation before installation:
Check whether the following assemblies are complete:
Name
Qty.
Remarks
Wired controller
1
Cross round head wood mounting screw
3
M4×20, for mounting on the wall.
Cross round head mounting screw
2
M4×25, for mounting on the electric
switch box.
Installation manual
1
Owner’s manual
1
Plastic expansion pipe
3
For mounting on the wall.
Plastic screw bar
2
For fixing on the 86 electrician box.
Prepare the following assemblies on the site:
Name
Qty.
Remarks
Wiring tube (insulating sleeve and
tightening screw)
1
Embeded into wall.
Electrician box
1
Embeded into wall.
1.4.3 Dimensions