13.3 Schedule Function
The SCHEDULE menu contains the following items:
1) TIMER
2) WEEKLY SCHEDULE
3) SCHEDULE CHECK
4) CANCEL TIMER
13.3.1 TIMER Function
If the timer function is enabled, the icon will be displayed on the main interface of the wired controller. If the weekly
schedule function is enabled, the timer function will be disabled.
Use ''◄'', ''►'', ''▼'', ''▲'' to scroll and use ''▼'‘, ''▲'' to adjust the time, the mode and the temperature.
Move to ''■'', press '' OK '' to select or unselect.
( the timer is selected. the timer is unselected.) six timers can be set.
If you want to cancel the TIMER, change the cursor to '' '', and press ''OK''. The will become ,
and the timer is disabled.
If the start time is later than the end time, the following interface is displayed.
To Next Page
Loading...
