Midea SMK-D140HHN1-3

High Temperature Hydro Module
202003 25
Engineering Data
To set the temperature at multiple points, connect a third-party thermostat to set different temperature set points.
Voltage
220-240V~
Maximum running current (A)
< 0.1
Wiring size (mm
2
)
2x0.75
 Alarm output signal
When the unit fails, a signal can be output to indicate the unit status.
Voltage
220-240V~
Maximum running current (A)
2
Wiring size (mm
2
)
2x0.75
Note: After wires are connected, do not place the redundant wires into the unit.
CN22
N MSP1N
N
MSP2
AL
CN22
NAL