Service Manual_2020-V1.0
26
1）Remove two screws from the refrigerating air duct
with a cross screwdriver;
2）Pull all connector terminals out of the refrigerating
air duct to remove its components;
7.5 Air duct components in freezing chamber and fan motor
Air duct components in freezing chamber
All accessories in the freezing chamber should be
dismantled before removing the air duct components.
1）Remove 2 screws on the cover plate of the freezing air
duct using a cross screwdriver
2）Hold the middle position upper of freezer air duct, raise
it then pull it outwards gently.
3）Pull out the connector terminal.
To Next Page
Loading...
Need help?
General
