Do not attempt to remove belt.
Cleaning tools
Roller brushmaintenance (weekly cleaning recommended)
Turn the main unit over. Release the
cover plate of the roller brushand
pull it out, and lift the right side of
the roller brushto take it out.
1.
After cleaning, press the end
cover back to the roller brush
body. Install the roller brush
body into the main unit
according to the direction
shown in the figure. It is
recommended to clean the
roller brushevery week and
replace them every 6 months.
4.Clean the roller brushand its
cover plate with the cleaning
brush or a soft cloth.
2.
Wash the roller brushwith water and dry it. 3.
How to use the cleaning brush:
① Cut the hair entangled on the roller brushwith the blade.
②
Brush
Blade
15
MAINTENANCE
To Next Page
Loading...
