Upright Pause Function
Self-cleaning + Drying Function
14
In working state, you can step on the floor brush to erect the body, the
machine will stop working and enter standby state; it will automatically
turn o after 3 minutes of standby.
Put the machine into the charging base, ensure that it is in the charging
state, step on the pedal of the charging base with your foot, and start
self-cleaning; during the process, if you need to stop the
self-cleaning/drying function, step on the pedal for 3 seconds or press the
On/O button; after self-cleaning, clean the wastewater tank in time; if
there are residual stains on the base, clean it in time.
Self-cleaning: the machine automatically cleans the roller brush and body
pipe (about 2 minutes);
Drying: Keep blowing warm air on the charging base,
and dry the roller brush properly (about 50 minutes);
To Next Page
Loading...
Need help?
General
