1. AudiolinkIII introduction
Thank you for purchasing the MIDIPLUS audiolink3 USB Audio interface. This interface brings an
unparalleled level of USB audio quality to the Mac or PC, with pristine 24-bit /48 KHz A/D and D/A converters,
an ultra-low jitter clock, and low noise MIC/ line /hi-Z preamp. (made some changes here)
You can download ASIO driver “Neutron_AL3_WIN32_2.9.30/ Neutron_AL3_X64_2.9.30” and Owner’s
Manual and Tutorials in the following Link:
http://www.midiplus.com.tw/MIDIPLUS-Download.htm
Features of the Audiolink3
◆ 2 channel 24 bit /44.1khz input, 2 channel 24 bit / 44.1kHz output
◆ 2 microphone inputs (XLR balanced ) with 48V phantom power and level control
◆ 2 high-impedance instrument / line inputs (balanced /unbalanced 1 / 4”TRS )
◆ stereo headphone output with level control knob gain control knob for input channel (+40 dB max)
◆ MIDI In & Out Interface
◆ USB-powered for total mobility
◆ Supports professional two-channel recording and playback
◆ Supports common sampling frequencies (see Technical Spec section )
◆ Extremely wide dynamic range and low signal-to-noise (see Technical )
◆ Spec section for ultra-quiet, professional-quality recording
◆ USB-powered or DC 9V IN.
◆ Class-compliancy on Windows XP Windows Vista & & Mac OSX (10.2.6. or greater)
◆ One-year warranty
System Requirements
The Audiolink3 has been designed to work with Windows XP or Windows 7.
Windows PC:
◆ Minimum Required
◆ 350 MHz Pentium 11
◆ 64MB RAM
To Next Page
Loading...
Need help?
General
