1.3. Basic settings
1.3.1. Connecting the power
1. Confirm the drum trigger module is turned off (no display on the display screen).
2. Plug the power cord into the jack.
3. The power supply plug into the wall outlet.
4. Turn the power switch.
1.3.2. Connect headphones or speakers
1. Connect the headset.
The headphone jack is inserted [ ].
2. Connect the speakers.
The speaker wire is connected to the Output of [L] and [R] jacks (standard mono
audio).
1.3.3. Connect music player
Can be [AUX IN] jack to connect a music player to this input MIX.
1.3.4. MIDI OUT /IN jacks
Sends MIDI messages to external devices and receives external MIDI messages (only
drums Channel 10).
1.3.5. USB port
This jack is used to connect the keyboard with the computer, send MIDI messages directly
to the sound card (only drums Channel 10).
1.3.6. Restore factory settings
1. Factory reset all settings.
Before turning the first press [Edit], and then turn on the power switch.
2. The basic rhythm set to restore factory default settings.
Before turning to hold down [Kit], and then turn on the power switch.
3. Advanced Drum Set restores factory default setting.
Before turning to hold down [Mute], then turn on the power switch.
To Next Page
Loading...
Need help?
General
