6
generated MIDI messages to another MIDI instrument (such as sound module).
3. MIDI “USB” Out Jack: - This standard MIDI jack receives its source from
the computer when software is set to MIDIPLUS i61 MIDI Out, and pass these
MIDI messages to another MIDI instrument (works like MIDI through).
4. USB Port - This USB connector jack is used to connect the MIDIPLUS i61
to the Computer’s USB port using a standard USB cable (included).
Specification
MIDI Channel, Reset, Octave -2,-1, center,
+1,+2, Program Change, CC-00/CC-32(For GS
Bank Selection),CC-No.(Generic CC
Assignment).CC-Data. Data Entry After
Touch Assignment, Data Entry Velocity
Assignment, Data Entry Reverb Send Level
Assignment, Data Entry Chorus Send Level
Assignment, Pan Pot Assignment (CC-10),
Volume Assignment (CC-07). CC-Data.
Numerical Keys x10, Enter, Cancel, Pitch
Bender Wheel, Modulation Wheel, Data Entry
slide
MIDI Out (DIN), Sustain, USB port connect
(for power and MIDI), Power SW.