5~8. Control 1~4 —Custom manual mapping controller
(corresponding to 1-8 encoder) software mapping brief
explanation (details see "Software Mapping")
3 The direction
key and four play
1~4. Bank Select --
Up: Current LIVE software SCENE (scene) move up a line;
Only the "Down" button LED light when to move up, moved
to 1-8 on the line, that is 0, " Down " button LED will turn off, "
Up"LED is not light.( SmartPad CLIP matrix buttons up -
send information accordingly, LED display effect is up, for
example: the current scene for 3-10 lines, move up a line into
2-9)
Down: Current LIVE software SCENE (scene) move down a
line; Most down eight line, even if the current one down the
line, the "Down" button LED will be lit.Only recovered to 1-8
line is 0, LED will turn off. ( SmartPad CLIP matrix buttons
down - send information accordingly, LED display effect is
down, for example: the current scene for 1-8 lines, move
down a line into 2-9)
To Next Page
Loading...
Need help?
General
