MIDI IMPLEMENTATION
Function Transmitted Remark Format
Program Default 0 Cn, pp
Change 0 - 127
Channel Default 0
Change 0 - 15
Note Default 36 - 84
Change 0 - 120
Velocity Key down 0 - 127 9n, kk, vv
Key up 0 - 127 8n, kk, vv
Volume Default 99 Bn, 07, vv
Change 0 - 127
Reverb level Default 63 Bn, 91, vv
Change 0 - 127
Chorus level Default 63 Bn, 93, vv
Change 0 - 127
Pitch bend wheel ok En, vv, vv
Controller change
(Definition of the
Modulation wheel)
Default 1 Modulation
Bn, cc, vv
Change
2 Breath
4 Foot pedal
5 Portamento time
8 Balance
10 Pan
11 Expression
64 Damper
65 Portamento
66 Sustenuto
67 Soft pedal
92 Vibrato depth
94 Celeste depth
95 Pan depth
Non-registered MSB Bn, XX, vv
Non-registered LSB Bn, XX, vv
Reset controllers Bn, 123, 0
Set MIDI mode Default Mode 1
Change Omni Off Bn, 124, 0
Omni On Bn, 125, 0
Poly Off Bn, 126, 0
Poly On Bn, 127, 0
Notes:
1. ”n” refers to channel number, “pp” refers to program number, “kk” refers to key number,
“vv” refers to one byte data, “cc” refers to control number.
2. There are more controllers besides that listed in the table. Please refer MIDI specification
3. Mode 1: Omni On, Poly Mode 2: Omni On, Mono Mode 3: Omni Off, Poly
Mode 4: Omni Off, Mono
To Next Page
Loading...
