Midland A-22075 Series - Page 14

P/N: A-22075/6, Rev. 1.1
Page 14 of 45
Figure 3-3 Remove Top Guide from Body
3.1.4 Remove the sealing gasket (item 15) and dispose.
Figure 3-4 Remove Sealing Gasket
3.1.5 Loosen the locknut (item 7) on the stem (item 2) while holding the retainer in place. See Table 1-2
for recommended wrench size. Remove the locknut from the valve stem.
Figure 3-5 Remove Locknut from Valve Stem